|
Hydroaccumulator ACS 2.5 with charging screw is mainly dedicated to hydraulic energy store, pulsation dampening and vehicle suspension. It is delivered either pre-charged with nitrogen to a storage pressure of around 5 bar, or pre-charged to the desired and ordered pressure. In case of any questions about chosing an accumulator, non standard version or application, please contact us.
Technical data of the hydraulic accumulator ACS 2.5
| Nitrogen capacity V0: |
2,5 [dm3] [l] |
| Mximum pressure (CE): |
330 [bar] |
Hydroaccumulator's diameter:
|
ø 115 [mm] |
| Hydroaccumulator's height: |
475 [mm] |
| Oil side orifice: |
G 3/4" |
| Gas side orifice: |
screw |
| Volumetric ratio (V0-V2)/V0: |
0,75
|
| Working temperature range: |
-20 do 120 [oC] |
| Filling gasses: |
nitrogen only
|
| Standard fluid: |
hydraulic mineral-based oils
|
| Weight: |
11,5 [kg] |
Data:
 Complete catalogue of hydraulic accumulators pdf (3MB)
Hydro-pneumatic accumulators' manual pdf (1MB)
Technology:
Full range of ACS hydro-pneumatic accumulators is made as welded non-dismantling vessels with elastomer bladder. Type of elastomer and inside coating determine allowable working fluids. It is mineral-based hydraulic oil as a standard, but the accumulator can be adopted to work with water, diesel fuel, gasoline or even ethylene oxide. Low tempereture versions working at -40oC are available. Charging and gauging can be made with VGL 4 or CGLU 4D.
Accessories:
- clamps;
- safety and shut-off blocks.
Advantages:
- interchangeable with most accumulators available on the market;
- completely modular 0,7 l through 4 l capacity, what enables fast production of non-standard intermediate models;
- exeptionally well bladder durability;
- possibility of rapid and total discharge of the accumulator due to anti-extrusion stud actually fitted onto the bladder;
- reasonable price.
Safety:
Hydro-pneumatic accumulators are gas pressure vessels falling within a directive 97/23/CE. According to applications, additional techical inspection UDT(Urzad Dozoru Technicznego) or TDT (Transportowy Dozor Techniczny) is required in Poland.
Hydraulic accumulators of less than 1 litre capacity are supplied with manufacturer's certificate. They cannot be marked CE but conform to the CE directive. Hydroaccumulators of 1 litre capacity and more are supplied with a CE certificate of conformity. They are CE marked and relevant document refers to the official organisation certifying their conformity.
If it is required, the accumulators can be delivered with additional certificates of independent organisations like: ASAP, APAVE, TUV, VERITAS, ABS, DNV, Lloyd etc. |
